Illustrative project scenario: This page is a specification-review example for B2B buyers. It does not identify a customer, describe a completed order or claim unverified test results, certifications or savings.
Project Background
A furniture OEM wants a control cable between a fixed frame and a moving hand controller or desk component. The cable should remain clear of the lift mechanism throughout the full height range and not pull the controller out of position.
Buyer Challenge
A relaxed coil can fit neatly under the desk but stretch too tightly at maximum lift. Excess return force may tug on a light handset, while a long tail may enter a pinch zone. The buyer needs the real movement path, not only a maximum cable length.
Specification Review
Provide frame geometry, minimum and maximum desk height, controller mounting position, connector model, wiring diagram and expected normal movement. Confirm relaxed length, extension during each lift position, tail lengths and clips or guides. Discuss jacket color and appearance separately from electrical and mechanical acceptance.
| Review area | Information to confirm |
|---|---|
| Desk motion | Full height stroke and cable routing envelope |
| Electrical | Controller circuit and pinout |
| Coil | Relaxed length, working extension and return-force target |
| Assembly | Connector orientation, clips and unit packaging |
Quality Check and Sample Approval
Check pinout and control function, full-stroke clearance, rebound at the handset, connector retention and strain relief in a representative desk. Repeated movement checks should use an agreed fixture and count based on the furniture programme; the cable name alone gives no cycle rating.
Use the TPU testing and quality equipment review to agree on instruments, methods and records. The sample approval worksheet can record any deviations.
Packaging and Delivery Review
Protect small molded connectors and distinguish left/right or alternative pinouts if used. Approve unit bag or carton packing with the furniture assembly line to avoid tangling and mis-picks.
MOQ, sampling schedule and production lead time must be confirmed after drawing, connector, material, test and order-volume review; no fixed terms are implied by this example.
Decision Gate
A production decision requires an approved routing sample, stable control function and a drawing that captures both tails and connector orientation. This is an illustrative specification review, not a statement of delivered order volume.
What to Send in Your RFQ
- Equipment or installation photo and drawing revision
- Electrical function, connector model and pinout
- Relaxed length, normal working extension and both straight tails
- Operating environment and test acceptance criteria
- Sample quantity, estimated production volume and packaging
Explore the Adjustable Desk Control Coiled Cable and the TPU coiled cable product range. Upload a drawing or send basic requirements for review.